Skipped timing on my vtec motor ideas??

[JDMDB7]

I went to go wore up my msd on my car and when I went to start it I got a crazy loud back fire sounded like I shot gun going off thought it was the dizzy that had fucked up and got a new one. Put it in and nothing got like a cloud of smoke coming out of like the head gasket so pretty sure I skipped timing but not sure if I ended up bending valves ideas of what kind of trouble im in.

[B18c1-Kat]

Damn how u do all this

[JDMDB7]

Wiring up the msd fml I don't know how that was even possible thats why I'm looking for ideas to what I could have done or maybe some has done this before

[B18c1-Kat]

Somebody help him please

[ls94civic]

bumpo

[Boosthead90]

Check the firing order too

[JayZeeGee]

sounds like you are dumping fuel into the combustion chamber. where did you wire the msd into? you didnt splice into the injector harness did you?

[JDMDB7]

sounds like you are dumping fuel into the combustion chamber. where did you wire the msd into? you didnt splice into the injector harness did you?

no ran the positive ignition wire into the dizzy and the negative to the dizzy harness clip spark plugs also have no more gap so something deff hit it

[JDMDB7]

Check the firing order too

I tried that also and it was correct... Thanks for the input guys any idea helps

[H22SteakSauce]

None of the plugs have gaps???

[ls94civic]

I dont think its possible to hit the spark plugs... but i could be wrong.... never have heard of such a thing

[JDMDB7]

None of the plugs have gaps???

cylinder one has no gap at all and the gap gets bigger as you check the other cylinders like two is barely no gap three is a very lil gap and four is like a normal or so gap when i put them in i gaped to spec and put the antizees not a rockie but i do believe in lube lmao

[JDMDB7]

I dont think its possible to hit the spark plugs... but i could be wrong.... never have heard of such a thing

your scaring me dude lol idk i will check anything you guys have an idea on this week gonna take it apart and hope for no bent valves

[JDMDB7]

bump

[94eg4dr]

Take your valve cover off and put your motor on tdc(top dead center) and check your timing marks on the cams and crank..if there good I doubt you bent valves..also double check the msd wiring