Vtec help!!!!!!!!

[JDMjoe]

whats up ctv so i have a z6 swapped into my cx and i really need help with wiring vtec. i know its only 3 wires but idk how to do it soo, if anyone on here can help me ill pay ya a resonable about of money, ill even come to you if not to far. shoot me a txt @8607547720

[leo2006leo]

Get a ex harness

[JDMjoe]

its alot simpler to wire the 3 wires i just dnt know how to do it.

[jdmjunkie9753]

There is three wires.. 1: Ground, 2: Vtec Pressure switch, and 3: Vtec solenoid. The ground, just needs to be connected to a good ground. The pressure switch needs be pinned into the plug that goes into your ECU, and the same goes for the solenoid wire. I believe for obd1 ecu's, you need to use pin A4 for the solenoid, and D6 for the pressure switch. To search the ECU pins, just look up the ecu & pinout (ex P28 pinout).