h22a1 skunk2 manifold

[jdmintegra83]

I have an h22a1 with a skunk 2 intke manifold already on the head. Will i have enough room with that manifold on the h22 to fit in the eg? Im worried the manifold might be to long and interfear with the fire wall... Any help on this?

[ptil4]

i don't think the skunk2 mani is too much longer than the stock im...you could always bang out the firewall a little to make it fit. you won't notice it if you don't go too crazy with it.

[civicgsr94]

its alot longer than the stock one i dont know bout eg but in my ek i just had to move my porporting valve down and inch its a tight fit my tps is prolly like 1/4" if not closer to the firewall

[DUSTY4DOOR]

It depends on wat mounts u hav u may hav 2 move the brake lines and bang the fire wall u just hav 2 test fit

[gixxerboy750]

if it h2b you'll be fine just need to put spacer's for the hood to rise it up a inch or so.

[SKUNK 2.2 COUPE]

yo youl be fine i have the same set up in my coupe no h2b