please hook me up with brake help

[littlevteckid]

i snapped a wheel stud today..so i took off caliper and now i cant get my rotor off..any suggestions??

[leo2006leo]

Put a screw thru the little hole or bang the backside with a hammer evenly

[single slam 12]

Did you remove the two screws in the rotor ? If u didn't that thing ain't com in off now if u strip them trying to take them out then drill them out

[shooktd]

before you strip said screws go buy an impact screw driver.

[Santi]

^x2 that thing works wonders I bought one specifically for those screws

[littlevteckid]

I took an impact driver to the screws and got them out no problem..but the rotor is just stuck..should i just keep bangin the back of it? or is there some other way?

[83rolla]

bang it till it brakes lol thats the only way it will come off of try to sqeeze in some pb blaster that should work

[littlevteckid]

aight cool..thanks alot for the help people..i just wasn't sure if i was missing somthing, ill just bang away lol

[bluxberryxhaze]

lol how are the rotors stuck? they should slide right out after the 2 screws are off...

[bluxberryxhaze]

just lightly bang around the rotor with a rubber mallet

[JDMjoe]

just lightly bang around the rotor with a rubber mallet

yes lightly bang away dont go and break your damn rotor (which you are probably doing right now) lol well good luck

[the jdmchop]

Bfh is your friend

[Rocker]

bfh is your friend

bfh ftw!!!