Help!! EK Rear Spacer Size..??

[crzycivic93]

enough with the bullshit. if you guys don't know the correct answer, don't attempt to help.

http://hondaswap.com/wheels-suspension-tires-brakes/ek-eg-suspension-38232/

post 3

approx. 5mm. which, yes, is a 3/16" spacer needed to fit eg suspension on your ek.

now, to everybody who's arguing, eg/ek suspension is exactly the same except the width of the sleeves that are in the bushings on the outer side of the rear LCA's. eg's are fatter than ek's...by about 3/16".

of course you can attempt to pinch everything/bend the lower mount on your suspension (and weaken it while pulling that ghetto shit), or you can go get washers or cut a piece of small pipe to size.

Thanks Bro.

[jdmjunkie9753]

Can always count on Doug to know the answer lol.

[ls94civic]

bumpp for shit talkers. thats all this place is full of.

agreed this would be a great sig which i would snag but i cant add anything else with my pixel car

[gsr17y]

agreed this would be a great sig which i would snag but i cant add anything else with my pixel car

and you the biggest one!! lmao

[IREDLINE2]

4.92 mm are the size that came with my omnis x4

[efadict23]

im good wit that ghetto shit..

news flash bro hate to burst ur bubble but thats exactly how its done...the flaps of the shocks just pinch closer together on the control arm....you could use a washer i guess but the difference is to small that no one ever does it...besides the washer might cause unwanted friction in the control arm bushings...

[crzycivic93]

guess not, cuz its done already.