ball bearing turbo,what size oil restrictor?

[LS/Vtec]

an is the # divided by 16 so...
-4 an is 4/16 or 1/4"
-6 an is 6/16 or 3/8"
-8 an is 8/16 or 1/2" etc.

[injen78]

fuck -6an is waaaaaaay to big.even a -4an is too big.def gonna have to order a restrictor..

[LS/Vtec]

yea. no restrictor = fail!

[injen78]

so im gonna guess that 1/8npt cross referances to -4an?

[Slicks]

I run a -4AN line for my oil feed line with a 1/8" NPT fitting at the turbo. No need for an oil restrictor.

[injen78]

what type of turbo are you running?

[jmartinez1228]

http://store.forcedperformance.net/m...e=Acc-OilLines

This is what i run on mine but its made by the same company that made my turbo so thats what they "recommended". Its a .030 restrictor so it may be too small for you but I'm sure if you call them up they can get it to a .035 for you since they make them there.
I'm running a dual ball bearing gt30 turbo with it.
Also you are running coolant to it correct?

[injen78]

nope just oil cooled.i actually found a restrictor.now im just trying to figure out how to adapt it to my feed line..its 1/8npt female and the restrictor is either -4an or -3an..idk ive gotta waqit for them both to arrive.