max boost on stock sleeve d16z6?

[jova1565]

Want to know what's the max boost stock sleeves can hold on a d16z6

[ManTyme]

google will help more than anyone on this site lol

[LS/Vtec]

Depense on what size turbo.

[pizzaboy720]

Depense on what size turbo.

Noooooo depends on compression mine cracked at 15 lol

[egkid129]

X2 depends on setup period, I've seen stock sleeve piston/rod setups touch 400hp.Donny know foutre how long but they did lol

[spoon860]

Bone stock engine I wouldent go over 10psi

[boostedcrx]

stock sleeves can handle a lot, depends on the tuner. stock internal's however wont last long

[Spoon6]

id say 400whp with a good tune otherwise badddaaaboooomm!!!!!!

[ct tibby]

lol 400whp at like 7500 rpms. stay under 10 psi. becuase im assuming you dont want to spend money thats why you dont want to build the engine. 400whp means a crazy good tune a legit turbo/mani and exhaust. good motor mounts nasty clutch upgraded injecotrs fpr and fuel pump.possibly lines.

[brentpadgett]

Honda Tunner did a write up some years ago on a fully stock GSR and pushed it to 23 lbs of boost, with that said it was only to see how much it could handle and for how long. So my guess is 11 lbs of boost!

[jova1565]

I'm building the bottom end eagle rods vitara acl race bearings stock head and a t3t4 turbo

[Mowgli]

Only D series stuff I have done was run a Greddy kit on a mini me at 12 psi. Motor just had Honda MLS HG and ARP's. Took it for a bit, but the headgasket and intake manifold gasket let go. Can still drive it around, but if you push it a little too much, my heat cuts out lol. So it's letting air into the cooling system. Going to do a rebuild on it when I finish one of my other projects.

[H22SteakSauce]

bump

[honda 97]

time and time again people try and give boost psi limits when that dont mean shit.
10psi on a gt42r and 10psi on a td04 is a big power difference so you need a hp limit not psi limit. 400hp is the max limit on stock sleeves so id say your safe at around 350, so you have some reliability out of it and not pushing its limits.

[LS/Vtec]

time and time again people try and give boost psi limits when that dont mean shit.
10psi on a gt42r and 10psi on a td04 is a big power difference so you need a hp limit not psi limit. 400hp is the max limit on stock sleeves so id say your safe at around 350, so you have some reliability out of it and not pushing its limits.

Exactly what I was trying to say lol.

But it really all depense ont he builder, parts, turbo, tuner and luck. lol