WTB K-Swap Interior Harness

[Tate2k]

Used to connect your K-Series engine harness to your ECU and interior harness. need for a EK this asap. now is there anything im missing? and do the mounts line up or do i have to weld them in?
i have:
ecu
motor, tranny
motor harness
mounts
axles

[Tate2k]

bump

[JDMjoe]

bump

[jmacsss]

gotta weld in the tranny bracket im pretty sure

[LS/Vtec]

gotta weld in the tranny bracket im pretty sure

No you dont.

And btw this is called a sub harness.

[LS/Vtec]

You need

-K Pro (dont need it but i recommend it) Or remove the immobilizer in your ecu.
-Swap Header
-Fuel rail(stock one can be used if you mod the fittings), Fuel Pressure Regulator and Fuel Lines
-Swap Radiator or Use a half mount and mount it on the drivers side. The you'll need a karcepts radiator bracket unless you make you own.
-You'll need coolant hoses and a adapter for the lower hose to put in a temp switch and fan switch(from a b series/d series)
-Shifter Box and mounting plate depending on which setup you use
-shifter cables
-clutch line


im prolly forgetting some stuff.