B20 full out discussion!

[Drsexiestboy]

I want the b20b. Goin into my 4 door civic.

I want to know specs, pros, cons, best mods. Best tranny to accommodate it and the best place to get it from.

I want all motor for NOW!

OPEN DISCUSSION TO ALL!

[BptzIllest186]

My o2: hmotorsonline.com would b the place to get it. Jdm engines depot sells blown motors trust I got fuked with one. I would go with a Gsr or type r tranny. Wit LSD n plan on going vtec wit the right build my o2

[Drsexiestboy]

My o2: hmotorsonline.com would b the place to get it. Jdm engines depot sells blown motors trust I got fuked with one. I would go with a Gsr or type r tranny. Wit LSD n plan on going vtec wit the right build my o2

Yes vtec will be added after. and i was looking at hmotors i think i might go with them. They have a good rep aswell.

[Slicks]

I like tigerjapanese.com B20B1 for $415. As said above, GSR or Type R tranny with LSD and go VTEC. I would also get high compression pistons because LS/VTEC's or B20/VTEC's with stock flat top pistons are dogs. VTEC needs a good amount of compression to get the best bang for your buck. Plan on doing ARP rod bolts, ARP head studs, and ACL Race Bearings. Maybe port and polish the head, do some cams and valve springs/retainers. You should have a nice reliable B20/VTEC.

[Slicks]

Oh shit, I saw the "all motor for NOW" part lol. On that note, don't do high compression pistons.

[Drsexiestboy]

I like tigerjapanese.com B20B1 for $415. As said above, GSR or Type R tranny with LSD and go VTEC. I would also get high compression pistons because LS/VTEC's or B20/VTEC's with stock flat top pistons are dogs. VTEC needs a good amount of compression to get the best bang for your buck. Plan on doing ARP rod bolts, ARP head studs, and ACL Race Bearings. Maybe port and polish the head, do some cams and valve springs/retainers. You should have a nice reliable B20/VTEC.

Ive seen tigerjapanesse.com before but are they RELIABLE?

[Slicks]

Two of my friends bought B20's off of there and they were MINT. I plan on buying something from them soon but I don't know what I want yet. Too many options/ideas.

[Drsexiestboy]

Two of my friends bought B20's off of there and they were MINT. I plan on buying something from them soon but I don't know what I want yet. Too many options/ideas.

They shipped to your friends house? and hit me up with a pm when you buy something to see if there reliable.

[Slicks]

Well it got shipped to my house 'cause I did the swap for him. And I won't be buying something for a while lol.

[Drsexiestboy]

Well it got shipped to my house 'cause I did the swap for him. And I won't be buying something for a while lol.

lol, so there motors are clean|good? Hows the shipping crew(people) were they nice etc etc? that shows alot about a company to.

PS. where you located and how much for the swap. Including my help

[Drsexiestboy]

B20B/B20Z

* 1999 - 2000 specs
* NON-VTEC
* Found in: USDM CRV as a B20Z, JDM Honda CR-V and Honda Orthia as a B20B
* Displacement: 1,973 cc (120.4 cu in)
* Power: 146 hp (109 kW)) @ 6200 rpm
* Torque: {{convert|133|ft.lbf|N.m|abbr=on}@ 4500 rpm
* Rod length: 137 mm (5.4 in)
* Compression: 9.6:1
* Bore: 84 mm (3.3 in)
* Stroke: 89 mm (3.5 in)
* Redline: 6700 rpm
* Fuel Consumption: 14 km/L


^^thats what i want. where can i find a b20z/JDM B20B (USDM B20B only brings 126hp=boo)

[Slicks]

Is was very clean. They drove a semi into my neighborhood lmao. The trucker was very cool and helpful. It was snowy and icey and shit and he helped me get it into my driveway.

[Slicks]

I have no idea where to find a B20Z because that's the USDM B20. I've wanted the cams out of one.

[Drsexiestboy]

i just checked. Hmotors has it for 7somthing. Its also known as the 99-00 spec.

[spooncb7]

i put a b20 from tigerjapaneses into my girls 4 door teggy thing runs mint.....was thinkin bout puttin on in my bubble...does anyone think that would be better than an ls?